The REVO6 2.0 uses a hub and flexible line to create a more equipment-friendly and user-friendly mowing experience. Unlike traditional metal blades, it provides a much safer operation by greatly reducing the risk of injury or debris being thrown from under the mower. It also helps protect your equipment from critical damage.

The REVO6 2.0 and REVOline delivers an efficient cut similar to that of metal blades, ensuring your lawn has a well-maintained appearance.

Check out the links below for a closer look at the performance:

Side by Side DEMO

Normal Environment REVO6 DEMO

Tall Grass REVO6 DEMO

The REVO6 2.0 is most effective when used with a mulching cover rather than a side discharge, rear discharge, or bagging setup. With 6 cutting contact points instead of just 2, the REVO6 finely mulches grass into very small clippings.

How long the REVOline lasts depends on your mowing environment. Under normal mowing conditions, the REVOline typically lasts up to 9 full hours of mowing before needing replacement.

Each REVOline comes pre-cut in 10.5” lengths, giving you a full 24 inches of cutting length when installed. If needed, the line can be trimmed to fit your specific mower deck.

By leveraging user feedback, we are continuously improving the patent-pending REVO6 system to address the critical need for a safer alternative to traditional metal mowing blades.

Regarding the REVOline, our ongoing R&D is dedicated to enhancing durability and cut quality.

While the REVO6 2.0 doesn’t create the same lift as conventional metal blades, its hub and line system generate sufficient airflow to provide a clean cut, leaving your lawn with a well-maintained appearance.

Yes, the REVO6 2.0 and REVOline use high-speed tip action to efficiently cut through tall grass. Customers find it provides a strong, consistent cut with less clogging under the deck and less strain on the mower’s motor compared to traditional metal blades.

The system is especially effective in the 2"–3" cut height range, but it will still handle tall grass by cutting it down smoothly while being safer and easier on your equipment.

In your cart, you’ll enter your mower’s make, model, and blade hole type.

Providing specific details such as spindle size (1/2", 3/8” or 5/8”) and blade hole design (round, 4-point, 5-point, 6-point, 7-point, or S-shape) helps ensure a perfect fit.

Spacers that match the hole design of your mower are provided. There is also a guide on our website that can help you choose the correct spacer.

As previously stated, spacers that match the hole design of your mower are provided with your REVO6. The REVO6 2.0 is a universal fit for the large majority of mowers, using the same bolt or nut that holds your current blades.

View our current available spacer inventory here: Current REVO6 Spacer Inventory

You can find tutorial videos on our website to provide further assistance.