Shop Now
REVOline
REVO6 Reviews
UNUSUAL - PRETTY WELL
A very unusual young man with an equally strange name called me a week after I received my Revo. I told him that I had only used them for a few minutes as the belt on my mower had broken, no fault of the Revo. I can now say that they work pretty well even with my AG land grass which is very hardy. I mowed about 2 acres before I saw any skipping and I had not lost a single string. It only took about 10 minutes to refresh them, and I was back mowing. I was glad to see that they were much less prone to throwing rocks. I’m not saying they don’t throw rocks, just that it was much less in my case. I also did not have to move the irrigation hoses as the Revo glided right over them with no damage. I could have never done that with blades. Christopher Miller – Gaston, NC
WORKS GREAT and NO FIRE HAZARD!
“I’m happy with your system, it works great! We are in California, and I was able to mow without starting a fire!”. – Cooper Johnson, Glen Elen, CA
QUIET MOWING!!!
“It mows very quiet; it mowed very well!” -Ryan Casey, Wetonka, SD
WORKS REALLY GOOD!!!
“I mow 7 acres, and this works really good, it looks like a golf course. Will be ordering more line next week.” – William Brewer, Russellville, AR
NEVER GOING BACK TO METAL BLADES!
“I love the REVO6 and will never go back to metal blades. It is much quieter, easier start up on the mower, less vibration, provides a good cut, and provides me with the confidence when mowing thick grass that I am not going to hit something and damage my mower.” Jim Sarantos – Tyler, TX
NO FLYING WALNUTS!
“It works good, I mow 3 acres with lots of walnuts that don’t go flying now!” – John Kenyon, South Elgin, IL
PROS & CONS
Pro’s- so far… quieter, less vibration, level cutting, easy install, safer than spinning blades, so far, a pretty good innovation to a growing industry. Cons- Will throw lines if hitting something like we all do from time to time. -Ronnie Fain, Gentry, AR
MONEY SAVINGS
This new technology is going to save us money as I don’t have to be concerned about slinging rocks that will break windows inside the trailer parks that I mow. It also uses less gas and kicks up less dust leaving me less dirty when I’m finished. I do like this system. – Joe Johnson, Bay City, TX
TIME SAVER
“This is going to save me a lot of time. I mow 11 acres and the blades used to grab and get stuck on small saplings, this just knocks ’em over and I keep on going. This mows real good”. — Tyler Kalla, Sinton, TX
I LIKE IT!!
“I like it, used it a couple times on my 4 acres, doesn’t stir up the dust and it is quieter, haven’t had to change out any lines yet”. — Jerry McGuire, Lebanon, MO
Arizona Customer Review
These blades are worth it if you are mowing in large acreage with small rocks!
They cut good and last very long on blade change. I had my neighbor purchase them after he saw what they did.
Good Idea!
Believe it or not, I actually modified my Husqvarna Riding Lawnmower 12 years ago to use DR Trimmer String Mounts and Strings, because my country property is so riddled with rocks that the second time I mowed, one of the manifolds literally tore off of the cutter platform. No further problems ever since I switched to strings, and the grass is cut smoothly, too. I should have marketed the idea.
CAN'T WAIT!
Saw something similar years (35) ago being used on a church lawn in far west Texas (lots of rocks). It was homemade, used wire whips and did a fantastic job. Never have been able to find anything like it until now. Lifting my 60″ Hustler won’t be a problem; I’ll just use the pallet forks on my front-end loader just like any other maintenance, get it up to waist level and make it easy on your back (I’m 79).
I CANT WAIT TO GET MINE AND PUT IT TO USE!
FAQs
The REVO6 2.0 utilizes a hub and flexible line, creating a more equipment-friendly cutting environment when encountering hard or stationary objects. It provides a much safer user experience compared to metal blades, significantly reducing the risk of injury or objects being thrown from under the mower while still providing an efficient mowing environment for a well-maintained yard.
The REVO6 2.0 and REVOline delivers an efficient cut similar to that of metal blades, ensuring your lawn has a well-maintained appearance.
Yes, the REVO6 is most effective when used with a mulching cover rather than a side or rear discharge or bagging setup.
Line replacement frequency varies based on lawn conditions and obstructions, but under normal conditions, the REVOline typically lasts for about 9 hours of mowing. The REVOline comes pre-cut in 10.5” lengths, offering approximately 24 inches of cutting length when inserted.
Blade Solution Corp (BSC) is committed to continuously expanding the design of the REVO6 to accommodate as many blade hole shapes and spindle diameters as possible. By leveraging user feedback, we strive to make the REVO6 even more efficient, user-friendly, and safe. For REVOline, our ongoing research and development efforts focus on enhancing durability and cut quality. Our goal is to provide the best alternative to metal blades, ensuring a safer and more efficient mowing experience.
While the REVO6 2.0 doesn’t create the same lift as conventional metal blades, its aluminum hub and line generate sufficient airflow to provide a clean cut, leaving your lawn well-maintained. It performs best with a mulching cover.
Yes, REVO6 2.0 and REVOline can cut tall grass. However, just like with metal blades, you may need to slow down and make multiple passes to achieve a clean cut when mowing thick or tall grass and weeds. The advantage of the REVO6 is that if you run over rocks, limbs, stumps, metal, or any other objects that could damage traditional blades or your mower, it will only take a few minutes to replace the line, saving you hundreds of dollars in potential repair costs.
During checkout, you’ll enter your mower’s make and model to help us determine the appropriate spacer for your order. Providing specific details such as spindle size (3/8” or 5/8”) and blade hole design (round, 4-point, 5-point, 6-point, 7-point, or S-shape) helps ensure accuracy. Spacers that match the hole design of your mower are provided. There is also a guide on our website that can help you choose the correct spacer.
As previously stated, spacers that match the hole design of your mower are provided. The REVO6 2.0 is a universal fit for the majority of mowers, using the same bolt or nut that holds your current blades. Currently, our largest center hole will fit spindles up to 5/8 (.625) in diameter. We have a bushing/washer kit that brings the hole down from the 5/8 (.625) to a 3/8 (.375) hole for the majority of push mowers. Installation requires the same tools used to change your blades. You can find tutorial videos on our website to provide further assistance.